Chinese wholesale Inline Air Plasma Pcba Clean System - PCBA Dust Cleaning Machine – JKTech

■ Used for cleaning PCB surface dust and eliminate electricity static

■ In-line automatic cleaning machine, save time and labor

■ Configurated two sets of standard electrostatic eliminator on the entrance and exit end of conveyor, completely eliminate ESD remains on the PCB surface and as the standard to ensure the highest safety operation running

■ Draw-out design, the cleaning roller can be drawn out, making it easier to maintenance and changeover

■ Process width: 50 ~ 490mm, PCB thickness: 0.1 ~ 5.0 mm

■ The height of the cleaning roller is precisely adjustable

■ Various spec of rollers available

01005: 0.4mm x 0.2mm

■ Standardized with supporting rollers at the bottom of the PCB to prevent PCB warping and minimize stress changes

■ Configured board jam sensor inside and alarm timely

■ Process flow direction switchable, std is L to R

■ Fully adjustable support system ensuring the boards being processed are held in contact with the top cleaning module regardless of width and or thickness. No board jam in all process

■ Sticky paper usage time pre-setting by the software to avoid the paper waste and keep a high-quality performance in all process

■ Option- Built-in vacuum system to remove dirt, board scraps, fibers, hairs and other foreign bodies on the surface before roller cleaning

■ Cleaning method: ESD brush + standard dust clean roller (ESD roller is optional)

ESD capability: <50V (meeting “Huawei-Mobile Phone” products requirement)

Model	SIZE	Width (mm)	Cleaning side	ESD Brush	Remark
RJ-1133C	M	50 ~290	Single Top side	no
RJ-1153C	L	50 ~490	Single Top side	no
RJ-1136C	M	50 ~ 290	Both	no
RJ-1156C	L	50 ~490	Both	no
RJB-1133C	M	50 ~ 290	Single Top side	std
RJB-1153C	L	50 ~490	Single Top side	std